Semrad Process Control and Monitoring logo
Search
Close this search box.

Load Stand II; Load Cell

Features

Features and Benefits of the Load Stand 2; Load Cell:

ORB Enabled; Remotely manage your inventory and stock levels from off-site locations via the internet.
Monolithic Design; Provides simplified installation and lower cost as no external vessel tie downs are needed as with other load cells.
High Output; Higher output for greater noise immunity and longer cable runs.
Multiple Weight Ranges; 25,000 lbs to 1,000,000 lbs covers bulk applications, meets all IBC codes and has FM approval.
Solid State Strain Sensors; No summing boxes required, cuts costs and allows field replacement of sensing elements.
Limited Down Time; Field repairable. Custom mounting plates available for different mounting configurations.

Product Enquiry Form (#1)

Product Description

The Kistler-Morse® Load Stand II® is a direct vessel-to-foundation structural member designed to be your dependable and accurate continuous inventory monitoring and control solution. The Load Stand II® system is ideal for vessels with loads of 100,000 lbs (45,000 kg) or more and is available for loads of 25,000 to 1,000,000 lbs (11,000 to 453,000 kg) per support point.

The monolithic design becomes an integral part of the vessel structure for maintenance free weight measurements with full IBC wind and seismic ratings. The sensing elements are field replaceable without taking the vessel out of service

The mechanical design of the Load Stand II® lends to simplified design of the mounting, whether by legs or gussets. Simple, rugged, and easy to match end-mounting plates yield minimum design time and easy installations.

Product PDFs: