Liquids

more categories

Ultrasonic	Hydrostatic	Megnetostrictive	Capacitance
Guided Microwave	Radar	Bypass Level Indicator	Interface Monitoring

These Level Transmitters are able to measure and indicate the level of any liquids being used or stored in a vessel. There are many different kinds of liquid level transmitters and indicators which work on different principles such as ultrasonic level transmitters, guided microwaves level transmitters and some level transmitters even use radar.

Products

Guided Microwave Level Transmitter

The MicroTREK level transmitter sends a microwave along a guide wire and measures the time taken for the wave to be reflected back to the sensor. This level transmitter comes in aluminium and plastic housings to suit any measuring situations.

EchoTREK Model SGA-380-6Ex

The EchoTrek level transmitters provide reliable measurement by emitting an ultrasonic pulse, and measuring the time taken for the sounds waves to be reflected back. This model is specifically designed to work with liquids.

EchoTREK SGP-380-2

This EchoTREK reliably measures level, flow and volume of liquids by emitting an ultrasonic pulse, and measuring the time taken for the sounds waves to be reflected back. Also available in Teflon and PVDF also.

EchoTREK Model SBP-480-2

The EchoTrek level transmitters provide reliable measurement of liquids by emitting an ultrasonic pulse, and measuring the time taken for the sounds waves to be reflected back.

Leveldata Bindicator Liquid Level Transmitter

This low cost, two-wire transmitter determines the liquid level by measuring the liquid head pressure. It is very similar to a standard bubbler system, but with an important advantage: the Leveldata does not require a compressed air supply.

EasyTREK Model SPA-380-4

EasyTREK sends an ultrasonic pulse (high frequency sound waves) and the reflected waves are then detected and measured which can be used to calculate the level of liquid in a vessel. This is all done in a single, integrated unit.

Bindicator Cap-Level II Capacitance Probe

Cap-Level II Capactiance Probe uses the proven method of capacitance change to determine the level of product in the vessel. 4-wire 120VAC or 240VAC

Bindicator Cap-Level IIA Capacitance Sensor

Cap-Level II Capactiance Probe uses the proven method of capacitance change to determine the level of product in the vessel. 2-wire 24VDC

MultiCONT - Multi Channel Process Controller

The MultiCONT multi-channel process controller acts as a universal interface between NIVELCO’s HART-capable intelligent level transmitters and the other elements of the process control system. With IEC approval, this device can be used in hazardous areas