IECEx Approved Products

IEC Certified Loop Powered Indicator PD6800

IEC Certified Loop Powered Indicator PD6800

Availability

Usually ships in:

4 Weeks

Product Description :

Product Brochure.PDF

Other models available, please contact us to find out what model suits your needs.

The new ProtEX-Pro PD6800 explosion-proof process meter brings modern design, easy readability, and enhanced functionality to hazardous areas around the world in a way never seen before. Competitors have lost sight of the fact that the primary thing customers want to do with meters such as these is to look at them. Customers want a meter that looks nice so they can be proud to install it in their facility. And they want a meter with a display that provides the important information about their process, can be seen under varied lighting conditions, from wide angles, and from a distance.

Key Features;

Informative & Easy to Read Display

The high contrast, backlight LCD display is easy to read from far away and under various lighting conditions. The upper display is 0.7" high and shows 5 digits of flow rate. The lower display is 0.4" high and shows either flow total or a tag with 7 alphanumeric characters. And best of all, the display is mounted right up against the glass so it can be seen from a wide viewing angle.

Through-Glass SafeTouch® Buttons

The PD6800 is equipped with four sensors that operate as through-glass buttons so that it can be programmed and operated without removing the cover (and exposing the electronics) in a hazardous area. These buttons can be disabled for security by selecting the LOCK setting on the switch located on the connector board in the base of the enclosure. To actuate a button, press one finger to the glass directly over the marked button area. When the cover is removed, four mechanical buttons located next to the sensors are used.

Modern, Sleek and Practical Enclosure

The first thing customers notice about a product is its enclosure and the ProtEX-Pro really shines here. The copper-free (0.30%), smooth, die-cast aluminum NEMA 4X (IP68) enclosure is finished with a corrosion resistant epoxy coating that literally does make the ProtEX-Pro shine. The built-in mounting flanges make for convenient wall or pipe mounting and there is even a slot on the back of the enclosure for centering on the pipe. There are two ¾" NPT conduit holes for wiring.

Wide Viewing Angle

Customers can't always look at the display from straight on, so the window and display module have been optimized to provide a wide viewing angle of approximately +/- 40°; nearly twice the competition! Remember, the PD6800 is designed to be looked at.

Perfect & Secure Fit Every Time

The internal cast rails ensure the ProtEX assembles together perfectly, quickly and securely; and everything lines up for optimal viewing every time. There are no standoffs to worry about breaking or getting out of alignment. Two spring-loaded, self-retaining, thumbscrews make the assembly a snap, while pressing the LCD as close to the glass as possible to improve wide angle viewing.

Environmentally Tough

The ProtEX™ Series not only looks great with their modern, smooth die cast aluminum enclosures, but they can be installed virtually anywhere. The NEMA 4X / IP68 enclosure provides serious protection from the elements, high impact, corrosion and electrical interference and the extensive, worldwide agency approvals means they can be installed virtually anywhere.

Quick Specs:

4-20 mA Input Loop-Powered

Modern, Sleek and Practical Enclosure

5-Digit, 0.7" (17.8 mm) Upper Display

7 Alphanumeric Character, 0.4" (10.2 mm) Lower Display

SafeTouch® Through-Glass Button Programming

Password Protection

32-Point , Square Root, or Exponential Linearization

Loop or External DC-Powered Backlight Standard

3.0 V Drop (6.0 V with Backlight)

Explosion-Proof, IP68, NEMA 4X Enclosure

Flanges for Wall or Pipe Mounting