Level switch, Tank Monitoring, Leak Detection, Flow Meter - Semrad

IEC approved Rate Totalizer with Pulse input. Model 6830
IEC approved Rate Totalizer with Pulse input. Model 6830

IEC approved Rate Totalizer with Pulse input. Model 6830


Usually ships in:

4 Weeks

Product Description :


Product Brochure.PDF

Other models available, please contact us to find out what model suits your needs.

The new ProtEX-RTP PD6830 explosion-proof rate/totalizer brings modern design, easy readability, and enhanced functionality to hazardous areas around the world in a way never seen before. Competitors have lost sight of the fact that the primary thing customers want to do with meters such as these is to look at them. Customers want a meter that looks nice so they can be proud to install it in their facility. And they want a meter with a display that provides the important information about their process, can be seen under varied lighting conditions, from wide angles, and from a distance. The PD6830 delivers all these and more. Spend a few minutes reviewing the features described in the graphic below and you will see how!

Key Features;

Informative & Easy to Read Display

The high contrast, backlight LCD display is easy to read from far away and under various lighting conditions. The upper display is 0.7" high and shows 5 digits of flow rate. The lower display is 0.4" high and shows either flow total or a tag with 7 alphanumeric characters. And best of all, the display is mounted right up against the glass so it can be seen from a wide viewing angle.

Through-Glass SafeTouch® Buttons

The PD6830 is equipped with four sensors that operate as through glass buttons so that it can be programmed and operated without removing the cover (and exposing the electronics) in a hazardous area. These buttons can be disabled for security by selecting the LOCK setting on the switch located on the connector board in the base of the enclosure. To actuate a button, press one finger to the glass directly over the marked button area. When the cover is removed, four mechanical buttons located next to the sensors are used.

Modern, Sleek and Practical Enclosure

The first thing customers notice about a product is its enclosure and the ProtEX-RTP really shines here. The copper-free (0.30%), smooth, die-cast aluminum NEMA 4X (IP68) enclosure is finished with a corrosion resistant epoxy coating that literally does make the ProtEX-RTP shine. The built-in mounting flanges make for convenient wall or pipe mounting and there is even a slot on the back of the enclosure for centering on the pipe. There are two ¾" NPT conduit holes for wiring and one ¾" NPT hole for flowmeter connection.

Wide Viewing Angle

Customers can't always look at the display from straight on, so the window and display module have been optimized to provide a wide viewing angle of approximately +/- 40°; nearly twice the competition! Remember, the PD6830 is designed to be looked at.

Perfect & Secure Fit Every Time

The internal cast rails ensure the ProtEX assembles together perfectly, quickly and securely; and everything lines up for optimal viewing every time. There are no standoffs to worry about breaking or getting out of alignment. Two spring-loaded, self-retaining, thumbscrews make the assembly a snap, while pressing the LCD as close to the glass as possible to improve wide angle viewing.

Environmentally Tough

The ProtEX™ Series not only looks great with their modern, smooth die cast aluminum enclosures, but they can be installed virtually anywhere. The NEMA 4X / IP68 enclosure provides serious protection from the elements, high impact, corrosion and electrical interference and the extensive, worldwide agency approvals means they can be installed virtually anywhere.

Quick Specs:

Pulse, Open Collector, NPN, PNP, TTL, Switch Contact, Sine Wave (Coil), Square Wave, Opto-Isolated Inputs

Modern, Sleek and Practical Enclosure

Isolated 4-20 mA Output for Either Rate or Total

5-Digit Rate, 0.7" (17.8 mm)

7 Alphanumeric Character Total/Tag, 0.4" (10.2 mm)

7-Digit Totalizer

SafeTouch® Through-Glass Button Programming

Battery, DC, or Output Loop-Powered Models

Gate Function for Rate Display of Slow Pulse Rates

K-Factor, Scaling, or Live Input Calibration

32-Point Linearization

Password Protection

Backlight Standard on All Models

Explosion-Proof, IP68, NEMA 4X Enclosure

Flanges for Wall or Pipe Mounting

Operates from -40 to 75°C (-20 to 75°C on Battery Models)

Follow Us

Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.

You may also be interested in this/these product(s)

  • Sign up to our newsletter



    Level Switches Level Switches Level Transmitters Level Transmitters
    Flow Meters Flow Meters Leak Detection Systems Leak Detection
    Weighing Systems Weighing Systems Level Measurement Level Measurement

     Semrad's Social Links

    Home  |  Products  |  Online Monitoring  |  Applications  |  About us   |  Sitemap
    Copyright © All rights reserved