|
submersible level sensors
 Nivopress N Series: Submersible hydrostatic sensor suitable for bore hole water well, effluent and sewage systems
http://www.semrad.com.au/products/level-transmitters/liquids/hydrostatic/nivopress-n-model-npk-520-3ex
 |
The Nivopress N hydrostatic level transmitters are designed to measure the level of clean or contaminated liquids. The pressure sensor at the bottom of the probe measures the sum of the hydrostatic pressure (Phydr) of the liquid column above it and the atmospheric pressure (Patm). The atmospheric pressure is led to the sensor through a breathing capillary which is equipped with a moisture filter that prevents the moisture reaching and damaging the electronics. This enables the atmospheric pressure to be subtracted from the measured pressure to get the hydrostatic pressure which is proportional to the height of the liquid column (h). The electronics converts the sensor's signal into an output signal. If temperature measurement (of the liquid) is needed beside the level measurement a combined (level + temperature) transmitter should be used. The installation and wiring of the transmitter is helped by the wide variety of accessories. A sewage adapter working on the principle of the diving bell can be snapped into the place of the protecting cap to avoid the direct contact between the sensor and the measured contaminated liquid.
Features:
Two- or three-wire submersible transmitter
Stainless steel body
Venting tube in cable
Up to 200 m range
Reverse polarity protection
Optional lightning protection
Linearity: +/-0.25%
HART communication
Built-in temperature sensor and transmitter |
Back to the link directory home page
More Links
|
|
Nivopress N Series: Submersible hydrostatic sensor suitable for bore hole water well, effluent and sewage systems
The NivoPress NPK submersible hydrostatic level transmitter is applicable to clean or chemically faintly contaminated liquids in boreholes, open reservoirs and tanks.
This two-wire level transmitter consists of a probe and a special, breathing cable containing a capillary pipe and a stress resistant inlet. The probe is a stainless steel cartridge with a membrane at the bottom.
Level metering is based on a measurement of the pressure difference between the hydrostatic pressure of the liquid head above the probe and the actual atmospheric pressure. This difference is converted into a 4 to 20 mA output signal.
http://www.semrad.com.au/products/level-transmitters/liquids/hydrostatic/nivopress-dt?keyword=nivopress
|
|
|
BieneRemote
Electronic design, Control Module. Remote Control and Monitoring via Cell Phone.
http://www.bieneelectronics.com/
|
|
|
'Level sensors for machine building
'MachineBuilding.net is a website where machine builders can find news and information about suppliers, products and systems for machine building. The website and associated newsletter are invaluable resources for builders of one-off machines, special-purpose machinery, series machines, industrial automation and engineered equipment.
http://www.machinebuilding.net/
|
|
|
Industrial Technology
Stainless steel submersible level sensor sensortechnics new kte6000cs series offers level measurement for ranges from 2.5 m water column (250 mbar) full scale. kte6000cs hydrostatic pressure transmitters consist of highly accurate and long-term stable pressure
http://www.industrialtechnology.co.uk/
|
|
|
Pollardwater.com
Waterworks and Wastewater Tools and Equipment. The KPSI Series 700 family of submersible level transmitters is specifically designed to meet the rigorous environments encountered in liquid level measurement and control in clean or slightly turbid water. Ideal for water reservoirs, clear wells and water tanks vented to atmosphere.
http://www.pollardwater.com/
|
|
|
EngNet South Africa
EngNet is an Engineering Directory, Buyers Guide and Search Engine - Designed by Engineers to benefit the Engineering Industry. EngNet enables you to source Engineering Products, Services and Companies
http://www.engnet.co.za/
|
|
|
EngNet South Africa
EngNet is an Engineering Directory, Buyers Guide and Search Engine - Designed by Engineers to benefit the Engineering Industry. EngNet enables you to source Engineering Products, Services and Companies
http://www.engnetglobal.co.za/
|
|
|
Submersible level sensors Products
Submersible level sensors supplier catalog - himfr.com provides what you want, submersible level sensors suppliers from reliable & professional submersible level sensors Manufactures, submersible level sensors Factories, submersible level sensors Manufacturing, submersible level sensors Manufacturer, Factory, Company, submersible level sensors Exporters, Companies, submersible level sensors Producers, Wholesalers, Distributors, submersible level sensors China, himfr.com to make your business flourishing.
http://www.himfr.com/
|
|
|
Duff And Macintosh Pty Ltd
Suppliers To Australia And New Zealand Of Industrial Instruments, Sample Conditioning Equipment, Engineering Education Equipment, oem Pressure Transducers And Transmitters. Process control is the oldest part of our business. Since we started in 1928, we’ve been providing process measurement and control solution to industry.
We understand flow measurement and flowmeters, specializing in including Mass Flow, Electronic Volumetric, Variable Area (VA or Rotameters) and DP generating meters. With our supply partners, Honeywell, Sensortechnics and Pyropress Engineering, we have become a comprehensive supplier of all sorts of level measurement techniques and devices. Duff and Macintosh are “The Pressure Specialists” – in fact we thrive under pressure! With our pressure regulation equipment, we can solve some of the most arduous pressure regulator and sampling applications.
http://www.duffmac.com.au/
|
|
|
LeighRSS.com
Free RSS tools to create, edit and publish RSS feeds for free and to locate suitable feeds for your content website.
http://www.leighrss.com/
|
|
|
REPCOM srl
Sensortechnics’ new KTE8000CS submersible pressure transmitters offer precision hydrostatic level measurement for pressure ranges from 2.5 m water column (250 mbar). The KTE8000CS series is based on very accurate and long-term stable ceramic pressure cells with excellent media compatibility. The sensors are enclosed in glass reinforced PPS (Polyphenylene Sulfide) plastic housings and are ideally suited for use with corrosive and aggressive media. The KTE8000CS series offers very competitive pricing for high-volume applications.
http://www.repcomsrl.com/
|
|
|
Sensors Northwest
Sensors Northwest provides two different companies to choose your submersible level sensors.
We encourage and develop a group of integrators throughout this territory who we bring project opportunities and who in turn will use our sensors. This allows us to develop companies with strong technical expertise and experience, in specific geographical areas providing systems using our sensors on projects for that area. This allows us to be much more diversified in our coverage and be effective at pulp & paper mills, wastewater plants, semiconductor plants, food processing facilities and etc. Our sensor products typically have applications in a broad range of markets and we feel we must make every effort to cover all of those markets to be worthy of their representation.
http://www.sensorsnw.com/
|
|
|
Level Sensors
The decisions you or your controls make are only as good as the information received. The Sligo Systems family of submersible level sensors is specifically designed to meet the rigorous environments found in landfill leachate and gas condensate systems. They can be configured to perform to specifications under most adverse, reactive conditions.
http://www.sligosystems.com/
|
|
|
SDI-12 Level Sensor
The Series 500 submersible hydrostatic level transducer represents the leading edge of level sensing technology available today. Incorporating a highly stable media-isolated sensor, the Series 500 features SDI-12 serial-digital interface. SDI-12 is a standard for interfacing data recorders with microprocessor-based sensors, especially in the environmental monitoring field. The transducer meets the demanding requirements of the USGS Office of Surface Water (OSW) accuracy specification for stage monitoring. The Series 500 is intended for applications with requirements that include battery-powered operation with minimal current drain, low system cost, and use of a single recorder with multiple sensors “daisy-chained” on one cable. It will accommodate cable lengths between sensors and recorder up to 200 feet.
http://www.streamlinemeasurement.co.uk/
|
|
|
Liquid Level Switch
Are you searching for information about liquid level switch? If you are looking for information about liquid level switch you will find it here.
http://liquidlevelsensor.net/
|
|
|
Liquid Level Monitoring System
EPG Companies manufactures level monitoring systems, liquid level metering, sensors, meters, landfill equipment, level transducer. The LevelMaster™ Stand Alone (LMSA) Liquid Level Monitoring System monitors and displays liquid levels in sideslope risers, wells, tanks, sumps, reservoirs, and settling ponds including corrosive, viscous, hot, explosive, and slurry-type liquids. The Level Monitoring System includes the following time-tested, field-proven components
http://www.epgco.com/
|
|
|
Global Water WL-15X Water Level Logger
Global Water's WL15X Water Level Logger provides a datalogger with a submersible pressure transducer for remote monitoring and recording of well depth measurements and water pressure data. This highly reliable and accurate water level recorder records 24,400 readings and is programmable from one reading per second to one reading per day. Ranges of 0-3', 0-15', 0-30', 0-60', 0-120' and 0-250' are available. A 25' cable is standard, and optional cable lengths are available up to 500'. The Water Level Recorder's datalogger is housed in a weather-resistant cylindrical enclosure that can slip inside a 2-inch pipe. The data recorder is easily adapted with standard hardware for well head mounting or other installations. The datalogger enclosure also houses an easily replaceable 9 VDC battery, which powers the Water Level Logger and level sensor for one year. Purchase of the WL15X includes Windows-based datalogging software, which allows easy upload of recorded data to standard spreadsheet programs on a PC computer.
http://cspoutdoors.com/
|
|
|
Submersible Pressure Transducer for Level & Pressure - Envco
The Water Level Sensor's submersible pressure transducer is fully encapsulated with marine-grade epoxy so that moisture can never leak in or work its way down the vent tube to cause drift or level sensor failure (as is the case with other pressure sensors). The water level sensor uses a unique, highly flexible silicon diaphragm to interface between water and the sensing element. This silicon diaphragm protects the water level sensor's electronics from moisture and provides each sensor with exceptional linearity and very low hysteresis.
Envco supplies environmental agricultural and scientific equipment for monitoring air soil and water. It is our goal to provide quality monitoring equipment to professionals who monitor earth processes and human impact on these conditions. As population density increases, demands and pressures are placed on the environments we interact with to exist.
http://envcoglobal.com/
|
|
|
Liquid Level Sensors
Used to detect the level of liquids that flow, a liquid level sensor can measure a fluid inside a container or a fluid in its natural form. The level measurement can be either continuous or point values. Continuous level sensors measure liquid levels within a specified range and determine the exact amount of substance in a certain place. Point-level sensors indicate whether the substance is above or below the sensing point. Liquid level sensor types include: fuel, oil, bio-fuel, water, specialist, and capacitive. These sensors are utilized for liquid level measurements in marine, chemical processing, pharmaceuticals, food processing, waste treatment, automotive, and military applications.
http://industrialsensorresource.com/
|
|
|
Weighing sensor channel
Weighing sensor channel,Weighing sensor channel. Manyyear Technology-load cell, weighing instrument, digital weighing, truck scale, pressure transducer, pressure sensor, pressure transmitter
http://manyyear.com/
|
|
|
Submersible/Level Pressure Transducer/Transmitter
Submersible/Level Pressure Transducer/Transmitter GP:50 Model 113, 213, 313 from Intertechnology Inc., providing Canada with more than the product for over 35 years.
http://processcontrol.asia/
|
|
|
LevelGage Submersible level transmitter
LevelGage Submersible level transmitter « Sensor, Control & Data Logger Blog. The US designed and built LevelGage sensor is an ideal level measurement sensor for most applications. With its 316L stainless steel construction, Polyamide and Fluorocarbon wetted parts, its suitable for a wide range of liquids and is specifically designed for indefinite submersion. With optional outputs of 0-5V, 0-10V or 4-20mA, a quick lead time and a full two year parts and labor warranty, this sensor is ideal for your level measurement applications, both small and large.
http://sensorsblog.com/
|
|
|
Ranchsystems.com
The WL-MS-SUB15 is a submersible water level sensor cable of measure the height of any column/body of water above the point of the sensor. Typically this sensor is submersed to the bottom of a water tank or pond for tracking of the water levels. The sensor includes 50ft of vented cable terminating in a small watertight junction box. From that junction box a futher 10 feet of sensorcable is provided for connection to an RM210 base station or RS210 node/logger.
http://store.ranchsystems.com/
|
|
|
MISSION Accessories
Mission Communications serves the alarm and telemetry data needs of water and waste water utilities to monitoring, control and perform status notification of remote equipment status.
http://www.123mc.com/
|
|
|
Underwater Temperature
Temperature pressure ph sensors for all your environmental monitoring requirements. The Starmon hi-temp is a stand alone temperature recorder designed for use in high temperature ranges. Starmon hi-temp records the temperature and stores the data into an internal memory under the control of a microprocessor.
http://www.absolutemonitoringtechnologies.com.au/
|
|
|
Accutech
Level Liquid-filled tanks and reservoirs are essential components in many industrial processes; from chemical batch production and storage, to water treatment and food processing, level measurement must be reliable, repeatable and reportable.
http://www.accutechinstruments.com/
|
|
|
ACS
Established in 1992 and without the constraints, limitations and restrictions seen by many suppliers and/or service providers, ACS supplies products from various manufacturers of industrial automation equipment to suit individual needs and requirements. Principally a service based company, ACS provides automation and process control support and equipment to improve operational performance and final product quality while reducing waste and increasing productivity to manufacturing arenas such as those listed here.
While providing equipment and technical enhancements in automation and process control such as; Process variable sensing, Stand alone and programmable logic control, Analytical instrumentation, Data acquisition logging and recording, Man machine interface, Final actuation devices, Radio telemetry.
http://www.acspl.com.au/
|
|
|
Data Logger
Our data acquisition systems, sensors & related equipment for monitoring the environment.
http://www.amassdata.com/
|
|
|
Andeswireless.com
The BR10 is a wireless base radio that automatically communicates with all deployed instrumentation field units attached to it in a local area star network and makes the field data available to an existing control system through a local serial Modbus interface.
http://www.andeswireless.com/
|
|
|
Aqualab
Aqualab Scientific is a leading supplier of environmental monitoring instruments. At Aqualab, we understand that our customers have an extremely important responsibility to protect and manage Australia's water resources. Our goal is to continue to offer the best technologies and services to provide reliable data that enables customers to make informed water resource decisions.
Aqualab Scientific founded in 1992 by Adam J. Merhab is a wholly owned Australian company located in Castle Hill, Sydney . Offering quality products such as Hydrolab, Diver, Turner Designs, OTT, Sigma and Hach Environmental for monitoring environmental water quality, water level,flow and precipitation. Brands that you have known and trusted for years. With over 21 years experience, put us to the test and see why the biggest users of water quality multiprobes in Australia prefer working with Aqualab Scientific.
http://www.aqualab.com.au/
|
|
|
Submersible Fuel and Oil Level Sensors
Fuel measurement sensors for world rally, aviation and prevention of haulage fuel theft. 'Top-to-Bottom' Tank measurement*. The sensor probe extends above and below the electronics to give the full depth measurement range for the tank. The external skin of the tank is unbreached and no part of the sensor protrudes outside the tank
http://www.avelec.co.uk/
|
|
|
AZSensor
The silicon measurement element is fully isolated from the media by a titanium isolation diaphragm. The use of titanium enables the sensors to be used in the most hostile of fluids where materials such as stainless steel cannot be considered. The sensor incorporates a purpose built electrical cable, vented to enable the pressure to be referenced against ambient barometric conditions.
http://www.azosensors.com/
|
|
|
Baumer
Baumer: Recalibratable Submersible Sensor ED752 for Water Treatment. With the ED752, Baumer offers a pressure transmitter for all kinds of hydrostatic level and depth measurement. In case of a signal drift, the zero point can be recalibrated. The device is characterised by high accuracy and long-term stability.
http://www.baumer.com/
|
|
|
BD-Sensors pressure measurement
BD-Sensors pressure measurement- Stainless steel transmitter with ceramic sensor
http://www.bdsensors.com/
|
|
|
Brennan Engineering Inc
Brennan Engineering deals with measurement devices, metering equipment, sensors, ABB VFDs, harmonic filters, wireless loggers, used equipment & custom prototyping. Brennan Engineering Submersible Level Transducers have been engineered to provide an unequalled level of performance. These transducers are constructed using the latest sensor technology to provide a very high degree of accuracy, vibration resistance, noise immunity, and long term stability. The transducers are also very electrically robust providing reverse polarity protection and short circuit protection. The external housing is 303 stainless steel with a 0.125” wall thickness providing excellent impact resistance and high pressure capabilities.
http://www.beiwy.com/
|
|
|
Campbell Scientific Australia
Campbell Scientific Australia are the experts in data acquisition systems, including data loggers, sensors, communications and peripherals for environmental, industrial and geotechnical applications. We specialise in hydrological, water quality and marine applications. Our instrumentation can measure a range of environmental parameters including level, flow & stream gauging. See our website today for more information.
http://www.campbellsci.com.au/
|
|
|
Water Level, Stage
Water level, stage, or flow can be measured with many types of sensors: pressure transducers, bubblers, shaft encoders, or ultrasonic sensors. The location where you are measuring water level, the...
http://www.campbellsci.com/
|
|
|
Madison Company
Product details, Madison Company: Liquid Level Sensor (Float): Metric Full Size: M3782: Submersible, PBT slosh shield, 6m PVC Cable
http://www.cdiweb.com/
|
|
|
YSI Level Scout Submersible Level Loggers
These YSI Level Scout loggers provide accurate data with easy-to-use data management software for applications including monitoring wells for long-term groundwater studies, aquifer testing, surface water monitoring for watershed management or gauging stations, and more. The submersible datalogging level transducer is an embedded datalogger and level sensor in one package. The small diameter (0.75") easily fits down any well that is at least 1" in diameter.
Models are available in stainless steel (SS) and titanium. Choose titanium models for applications where SS may corrode, such as salt water applications. User-selectable modes of sampling, pressure units, sampling frequency up to 15 measurements per second, and field-upgradeable firmware will provide years of sampling in a vari
http://www.coleparmer.in/
|
|
|
KPSI Series 700 Submersible Level Transducer
Danetech S.r.l. , Distributore di Celle di carico, Torsiometri, Calibratori di Pressione, Indicatori digitali, Manometri digitali. The Series 700 family of submersible hydrostatic level transducers is specifically designed to meet the rigorous environments encountered in liquid level measurement and control. They can be configured to perform to specifications under most adverse, reactive conditions.
http://www.danetech.it/
|
|
|
Keller-Liftstation
Keller-Liftstation
http://www.daquatech.com/
|
|
|
submersible KPSI level transducers
New submersible KPSI level transducers designed specifically for dataloggers provide superior accuracy September 11, 2. Pressure Systems, Inc., manufacturer of KPSI Level and Pressure Transducers, now offers two new submersible hydrostatic level transducers designed specifically for compatibility with Campbell Scientific dataloggers. The Models 116 and 126 transducers provide an innovative ratiometric mV analog output to achieve a Total Error Band (TEB) accuracy of ±0.3%, making them ideal for surface and groundwater level measurement and control applications, including well and surface water monitoring, soil remediation, and dewatering.
http://www.download3k.com/
|
|
|
Dwyer Instruments
Series SBLT2 & SBLTX Submersible Level Transmitter - Perfect for Ground Water and Wells, Lightning Protected or Intrinsically Safe. Perfect for Ground Water and Wells, Lightning Protected or Intrinsically Safe
http://www.dwyer-inst.co.uk/
|
|
|
Energy-online.net
Sensor specialist, ifm electronic, has launched a new range of submersible pressure transmitters, the PS3 series.The series is designed for applications such as level measurement in tanks and vessels,wells and boreholes, and wastewater treatment plants. The analogue output signal of 4...20 mA and the use of the twowire technology means PS3 sensors can be easily integrated into control systems. Reliability is enhanced thanks to the housing and the sensor diaphragm being made of stainless steel and an overall IP68 protection rating. With available pressure ranges of equivalent of up to ten metres of water per column can be measured.An internally vented cable is provided to compensate for atmospheric pressure.More articles from ifm electronic Limited: Easy condition monitoring from ifm electronic
http://www.energy-online.net/
|
|
|
Submersible Pressure Transducer for Level & Pressure
Global Water's WL400 Water Level Sensor provides highly accurate water level measurement for a wide variety of applications,Global Water's WL400 Water Level Sensor provides highly accurate water level measurement for a wide variety of applications, including those in severe environments. The submersible pressure transducers have a dynamic temperature compensation system, enabling high accuracy measurements over a wide temperature range. The water level sensor is easily adapted to all dataloggers, telemetry, monitoring equipment, and displays.
http://www.envco.co.nz/
|
Sub categories:
Back to the link directory home page
Nivelco, Wadeco, Precision Digital, Eurogauge, Camlogic, King Gauge, Labkotec, Sigalarm, Charis Foam Detection
|
61-2-9520-0222 
