Alarm Sensors for Oil/Water, Sand, Sludge Interface

Oilset

Interface Alarm Sensors for Oil, Water, Sand, Sludge and Grease

General
SET alarm devices are utilized in Oil Separators and grease traps, to indicate the need for emptying the oil/grease layer or the sludge deposits from the separator.

A reliable oil separator alarm device is the only way to be sure, when it is economically sound and environmentally safe to collect the hazardous waste from separators.

Oilset Specifications

SET-1000, OilSET-1000, SandSET-1000

Outputs: Two potential-free relay contacts, 250 V AC 5 A.
LEDs for mains, alarm, probe cable break and probe cable short circuit indication.

Internal buzzer and external alarm can be muted.
Direction of alarm operation can be changed.

Probe: Two capacitance type Labko SET/…2 series probes, SET DM/3 or SET/S2

Enclosure: IP 65, 175 x 125 x 75 mm (WxHxD), material polycarbonate.

Cabling between control unit and probe:
Screened instrument cable 3 x 0,5 mm2.
Max. loop resistance 75 Ohm.

Approval: II (1) G, [EEx ia] II C, VTT 04 ATEX 031X

SET-2000 Hi Level/Oil, SET-2000 Oil/Sludge

Outputs: Two potential-free relay contacts, 250 V AC 5 A.
One relay (alarm relay) resettable. LEDs for mains, alarm, probe cable break and probe cable short circuit indication.

Internal buzzer and external alarm can be muted. Direction of alarm operation
can be changed.

Probe: One capacitance type Labko SET/…2 series probe or SET DM/3 or SET/S2

Enclosure: IP 65, 175 x 125 x 75 mm (WxHxD), material polycarbonate.
Cabling between control unit and probe:
Screened instrument cable 3 x 0,5 mm2.
Max. loop resistance 75 Ohm.
Approval: II (1) G, [EEx ia] II C, VTT 04 ATEX 031X

Download PDF data sheet