Industrial Level Control Division
Level controllers, switches and transmitters,
designed specifically for harsh industrial applications,
including caustic and chemical solutions for liquid and solid measurement.
|
Australian
Distributors of
WaterLOG® high precision environmental products for water & weather measurement.
|
WaterLOG® H-340-SDI
Tipping Bucket Rain Gauge with SDI-12
Specifications
General
| Sensor: |
Tipping bucket with magnetic reed switch sensor |
Accuracy/ Rainfall Rate
Built in microprocessor measures the time between
bucket tips (rainfall rate) and uses this data to compute the
bucket volume per tip at the current rainfall rate. A built-in
math polynomial provides corrected bucket volume for
rainfall rates between 0 and 25 in/hour.
| Resolution: |
0.01 Inches |
| Rain fall rate: |
0 to 25 inches/hour (calibrated) |
SDI-12 Output
| Baud Rate: |
1200 |
| Protocol: |
SDI-12, 7-bit even parity, 1 stop bit. |
| Output Voltage Levels: |
|
| minimum high level: |
3.5 volts |
| maximum low level: |
0.8 volts |
| maximum cable length: |
250 ft. |
| SDI-12 Output Data Parameters: |
|
| 1: Accumulated rainfall since last measurement |
|
| 2: Raw bucket count since last measurement |
|
| 3: Total accumulation |
|
| 4: Total daily accumulation (today) |
|
| 5: Total daily accumulation (yesterday) |
|
Automatic daily accumulation using built-in crystal controlled time of day clock.
Power Requirements
| Voltage Input: |
10.0 to 16.0 Volts DC |
| Current: |
|
| Standby: |
150uA typical |
| Raining: |
3.7mA for 60 seconds |
| Communicating: |
9.8mA |
SDI-12 Output Connectors
4-position spring clamp terminal block (WAGO)
Environmental (electronics)
| Operating Temperature: |
-30 to +60oC |
| Storage Temperature: |
-50 to +70oC |
Environmental (mechanical)
| Operating Temperature: |
-0 to +60oC |
Mechanical
| Aperture: |
8 inch diameter funnel |
| Diameter: |
8 inches |
| Height: |
12 inches |
| Weight: |
8 pounds |
| Housing: |
Extruded aluminum tube with 2" diameter side windows. Cast aluminum base. Anodized aluminum internal parts. Stainless steel screws and fasteners. Powder painted base, funnel and housing. |
| Mounting: |
3-stainless leveling screws with adjustable aluminum feet. Internal "bulls-eye" level. |
Warranty
WaterLOG® H-340-SDI is warranted against defects in materials and workmanship for one year from date of shipment.
Note
Specifications subject to change without prior notice due to on going commitment to product testing and improvement.
September 1, 2000
WaterLOG® H-340-SDI Introduction
WaterLOG® H-340-SDI Specifications
Download PDF File (218kb)
|
H-340-SDI Introduction
H-340-SDI Specifications
Download PDF File (218kb)
|
