Industrial Level Control Division
Level controllers, switches and transmitters,
designed specifically for harsh industrial applications,
including caustic and chemical solutions for liquid and solid measurement.
|
Australian
Distributors of
WaterLOG® high precision environmental products for water & weather measurement.
|
WaterLOG® H-222-SE
High Data Rate GOES Radio System
Specifications
Frequency Coverage
| SE300 and SE1200 |
|
| 100 and 300 BPS: |
GOES Domestic Channels (1-199) |
| 100 BPS: |
International Channels (202-266) |
| SE1200 Only |
|
| 1200 BPS: |
HDR Domestic Channels (1-100) |
Frequency Stability
| Over Temperature: |
± 0.4 PPM |
| Long Term: |
± 1 PPM (including temperature) |
| Frequency Setting: |
To an accuracy of 1 Hz under software control |
Output Power
| SE300: |
10 Watts (nominal) Linear |
| SE1200: |
12.5 Watts (nominal) Linear |
| Output Dependence: |
50 Ohms, short and open circuit protected |
| Interface: |
RS-232 |
| Time Keeping: |
<0.5 seconds with embedded GPS Receiver |
| DC Power Input Voltage: |
12 V ± 1.8 V |
Environment
| Humidity: |
90% non-condensing |
| Temperature Range: |
|
| Operating |
-20 to +50oC (-40 to +122oF) |
| Storage |
-55 to +75oC (-67 to +167oF) |
Current
| Quiescent: |
<6mA (typical) |
| Transmit: |
<2.75A |
Mechanical Data
| Enclosure: |
Sealed, corrosion resistant fibreglass case |
| Size: |
7.0 in. wide x 8.5 in. long x 4.3 in. deep |
| Weight |
3.5 lbs. |
| Mounting: |
Hardware supplied for wall mounting |
Miscellaneous
Certification:
NOAA/NESDIS certified for self-timed and random GOES transmissions
Warranty:
The WaterLOG® H-222-SE is warranted against defects in materials and workmanship for one year from date of shipment.
Note:
Specifications subject to change without prior notice due to on going commitment to product testing and improvement.
May, 2001.
WaterLOG® H-222-SE Introduction
WaterLOG® H-222-SE Specifications
Download PDF File (211kb)
|
H-222-SE Introduction
Specifications
Download PDF File (211kb)
|
